Website for business customers

Shopping cart

Your cart is currently empty

Properties of Filter Fibres

Choosing the right filter fibre is essential for the performance and service life of industrial dust filters. Temperature resistance, chemical resistance and mechanical properties all play an important role in selecting the most suitable filtration material.

SOLANA supplies filter media made from various synthetic and mineral fibres for use in filter bags and filter sleeves, filter pockets and multi-pocket filter bags and filter cartridges and filter elements.

Below you will find an overview of the most commonly used filter fibres for industrial dust filtration, their key properties and typical applications.

Why is choosing the right filter fibre important?

The selection of filter media depends on several operating conditions:

Selecting unsuitable filter media can result in accelerated wear, chemical degradation, increased pressure drop, reduced filtration performance or premature filter failure.

The combination of temperature, moisture and chemical exposure is particularly important. A fibre that performs exceptionally well under dry heat conditions may deteriorate significantly faster in humid or chemically aggressive environments.

Overview of filter fibres and their properties

The table below compares commonly used filter fibres for industrial dust filtration.

Filter fibre

Continuous temperature (°C)*

Chemical resistance

Mechanical properties

Typical applications

Polyester (PES)

Approx. 140 °C

Resistant to many acids; susceptible to hydrolysis and strong alkalis

High strength and abrasion resistance

Woodworking, cement, food processing industries

Polypropylene (PP)

Approx. 90 °C

Very good resistance to many acids and alkalis

Good mechanical strength

Chemical industry, humid processes

PPS (Ryton®)

Approx. 190 °C

Very good resistance to many acids and alkalis; susceptible to oxidation

Good strength and abrasion resistance

Flue gas filtration, power plants

Meta-aramid (Nomex®)

Approx. 200 °C

Susceptible to hydrolysis at high temperatures in humid conditions, particularly in acidic environments

High strength and abrasion resistance

Metal processing, steel production, asphalt plants

Polyimide (P84®)

Approx. 230-240 °C

Depends on concentration, temperature and moisture; susceptible to strong acids and alkalis

Dependent on fibre and filter construction

Aluminium industry, flue gas filtration

PTFE (Teflon®)

Approx. 250-260 °C

Excellent resistance to almost all common chemicals

Relatively limited abrasion resistance

Chemical industry, aggressive process conditions

Fibreglass

Approx. 260 °C

Depends on glass composition and treatment; limited resistance to certain acids and alkalis

Brittle, limited flexibility

Flue gas filtration, thermal installations

* The temperatures shown are indicative values for continuous operation, primarily under suitable dry process conditions. Actual temperature resistance depends on the fibre quality, filter construction, moisture content and chemical exposure. The technical specifications of the selected filter medium should always be taken into account.

Polyester (PES)

Polyester is one of the most widely used filter fibres for general industrial dust filtration. It combines high mechanical strength and good abrasion resistance with a favourable price-performance ratio.

Temperature resistance: typically up to approximately 140 °C in continuous operation, depending on the specific material.

Advantages

Limitations

Polyester is susceptible to hydrolysis when exposed to elevated temperatures combined with moisture. Strong alkaline conditions may also cause degradation. Other fibre types may therefore be more suitable for prolonged exposure to hot, humid process air.

Typical applications

Polypropylene (PP)

Polypropylene is a synthetic filter fibre offering excellent resistance to many acids and alkalis. Thanks to its low moisture absorption, it is particularly suitable for chemically demanding or humid processes operating at relatively low temperatures.

Temperature resistance: typically up to approximately 90 °C in continuous operation.

Advantages

Limitations

Its limited temperature resistance makes polypropylene less suitable for hot process gases. Compatibility with specific solvents and oxidising substances must be assessed separately.

Typical applications

PPS (Ryton®)

PPS (polyphenylene sulphide) is a heat-resistant synthetic filter fibre designed for industrial processes where both temperature and chemical exposure are important considerations.

It is commonly used in flue gas filtration applications requiring resistance to acids and hydrolysis.

Temperature resistance: typically up to approximately 190 °C in continuous operation.

Advantages

Limitations

PPS can be affected by oxidising substances. At elevated temperatures, high oxygen concentrations and certain nitrogen oxides may significantly reduce its service life.

Typical applications

Meta-aramid (Nomex®)

Meta-aramid is a heat-resistant synthetic fibre used in industrial dust filters operating at high temperatures.

It combines good thermal stability with high mechanical strength and abrasion resistance.

Temperature resistance: typically up to approximately 200 °C in continuous operation under suitable dry conditions.

Advantages

Limitations

Meta-aramid can be susceptible to hydrolysis at high temperatures in the presence of moisture, particularly when acidic components are also present. The chemical composition and moisture content of the process gas are therefore important selection criteria.

Typical applications

Polyimide (P84®)

Polyimide, commonly known under the trade name P84®, is a high-performance synthetic filter fibre designed for industrial applications operating at elevated temperatures.

Its distinctive, irregular fibre cross-section contributes to efficient fine dust collection, making P84 particularly suitable for demanding filtration applications.

Temperature resistance: approximately 230 to 240 °C in continuous operation under suitable dry conditions, depending on the material specification and operating environment.

Advantages

Limitations

P84 is relatively expensive. At elevated temperatures, moisture, strong acids and alkaline conditions may reduce its service life. Particular attention should be paid to applications where acidic condensation may occur.

Typical applications

PTFE

PTFE (polytetrafluoroethylene) is among the filter fibres offering the highest levels of chemical and thermal resistance.

It is particularly suitable for applications where conventional synthetic fibres cannot withstand high temperatures or aggressive chemicals.

Temperature resistance: approximately 250 to 260 °C in continuous operation, depending on the material specification.

Advantages

Limitations

PTFE is more expensive than many other synthetic filter fibres. Its relatively limited mechanical strength and abrasion resistance must also be considered when selecting the filter construction.

Typical applications

PTFE used as a filter fibre should not be confused with a PTFE membrane or PTFE coating, which can be applied to various types of filter media.

Fibreglass

Fibreglass is a mineral fibre offering high thermal stability. It is mainly used in industrial filtration processes operating at elevated temperatures.

Unlike many synthetic filter fibres, fibreglass has limited elongation and flexibility. The construction and finishing of the filter medium are therefore particularly important.

Temperature resistance: typically up to approximately 260 °C in continuous operation with suitable filter constructions.

Advantages

Limitations

Fibreglass is susceptible to damage caused by bending, abrasion and repeated mechanical stress. Its chemical resistance also depends on the glass composition and any surface treatments applied.

Typical applications

Which filter material is suitable for your application?

The choice of filter fibre depends on the combination of operating conditions and required filtration performance.

For general industrial dust filtration, polyester (PES) is often a technically suitable and cost-effective choice.

For humid or chemically demanding processes at lower temperatures, polypropylene (PP) may be a suitable alternative.

For higher operating temperatures, PPS, meta-aramid and polyimide are commonly used. The selection depends strongly on moisture content, chemical composition and the presence of oxidising substances.

For very high temperatures, PTFE and fibreglass may be considered. PTFE is particularly suitable for chemically aggressive environments, while the chemical resistance of fibreglass depends on its composition and surface treatment.

In addition to the fibre type, factors such as fabric weight, thickness, air permeability, filter construction and cleaning method also influence overall filtration performance.

The influence of coatings and surface treatments

The properties of industrial filter media are not determined solely by the type of filter fibre used.

Depending on the application, specific coatings, membranes and surface treatments can be applied to further optimise filtration performance.

These treatments may contribute to:

Filter fibre selection and surface treatments should therefore always be considered together.

For more information, visit our knowledge page on coatings and surface treatments for industrial dust filters.

Frequently asked questions about filter fibres

What is the most commonly used filter material?

Polyester (PES) is among the most widely used filter materials for general industrial dust filtration. It offers a good combination of mechanical strength, abrasion resistance and cost-effectiveness.

Which filter material is suitable for high temperatures?

PPS, meta-aramid, polyimide, PTFE and fibreglass are commonly used for higher-temperature applications. The most suitable material depends not only on temperature but also on moisture content, chemical exposure and filter construction.

Which filter material offers the best chemical resistance?

PTFE offers exceptional resistance to almost all commonly encountered chemicals. At lower temperatures, polypropylene and PPS may also be suitable, depending on the chemicals present.

What is the difference between a filter fibre and a filter medium?

A filter fibre is the raw material used to manufacture filtration materials. A filter medium consists of one or more fibre types processed into a technical needle felt, woven filter fabric or another filtration material.

The properties of the finished filter medium are also influenced by its construction, weight and any surface treatments applied.

Can the same filter fibre be used for all applications?

No. The suitability of a filter fibre depends on operating temperature, moisture content, chemical exposure, dust characteristics, cleaning method and the configuration of the filtration system.

A material that performs exceptionally well in dry conditions may have a significantly shorter service life in humid or chemically aggressive environments.

Need help choosing the right filter material?

Selecting the appropriate filter material contributes to reliable dust filtration, a longer filter service life and efficient operation of your installation.

To help us recommend the most suitable filter medium, please provide the following information:

SOLANA can assist you in selecting the most suitable filter medium for your industrial dust filtration application.

Contact us for technical advice or a quotation without obligation.

Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »