Your cart is currently empty
Multiturn ironer felts are relatively thin ironer felts installed in multiple turns around the ironer roll. By selecting the correct combination of material, weight, thickness and air permeability, the felt padding can be matched to the ironer type, operating temperature and specific machine configuration.
Solana supplies multiturn ironer felts for professional and industrial laundries in polyester, Meta-Aramid and Meta-Aramid with PTFE. The range includes different qualities for standard applications, increased air permeability, higher operating temperatures and particularly demanding ironing conditions.
Get technical advice about your multiturn ironer felt
The CLASSIC range consists of polyester multiturn ironer felts for standard applications on industrial flatwork ironers. Different weights and thicknesses allow the padding construction to be matched to the machine configuration and required characteristics.
CLASSIC 600 is a lightweight polyester multiturn ironer felt with an open structure and high air permeability.
CLASSIC 600 – Lightweight polyester multiturn ironer felt with high air permeability.
CLASSIC 950 is a heavy polyester multiturn ironer felt with a compact felt structure and high resistance to hydrolysis. This quality is suitable for applications requiring a robust padding construction, good dimensional stability and long service life.
CLASSIC 950 – Robust polyester multiturn ironer felt with high hydrolysis resistance and long service life.
The COARSE range consists of polyester multiturn ironer felts with a special coarse-fibre structure. This creates a more open felt structure with particularly high air permeability.
The increased air permeability promotes the evacuation of air, steam and moisture through the ironer felt. This helps reduce moisture retention within the felt structure and can limit conditions that promote hydrolysis.
The COARSE range is therefore particularly suitable for ironers where an open felt structure, efficient steam evacuation and effective moisture management are important.
COARSE 720 is a lightweight, open polyester multiturn ironer felt with very high air permeability.
COARSE 720 – Lightweight polyester multiturn ironer felt with a coarse-fibre structure and very high air permeability.
COARSE 950 is a heavier polyester multiturn ironer felt combining a high felt weight with an open fibre structure.
The high air permeability supports the evacuation of air, steam and moisture and helps limit conditions that can promote hydrolysis.
COARSE 950 – Heavy polyester multiturn ironer felt with an open structure and high air permeability.
HYBRID 900 combines Meta-Aramid and polyester and is designed for ironers requiring greater thermal resistance and durability than a conventional polyester multiturn ironer felt.
The fibre layer consists of a combination of Meta-Aramid and polyester, while the carrier fabric is made from polyester.
This combination makes HYBRID 900 particularly suitable for steam-heated ironers, where temperature, moisture and intensive operation place high demands on the ironer felt.
HYBRID 900 – Durable hybrid multiturn ironer felt for steam-heated ironers and intensive use.
The THERMO range consists of Meta-Aramid multiturn ironer felts for ironers requiring high thermal resistance, reliable performance and long service life.
Meta-Aramid is particularly suitable for intensively used ironers where the felt is continuously exposed to elevated operating temperatures. Different weights and thicknesses allow the padding construction to be matched to the machine configuration and operating conditions.
THERMO 400 is a lightweight Meta-Aramid multiturn ironer felt for applications where a limited padding build-up is combined with the thermal properties of Meta-Aramid.
THERMO 400 – Lightweight Meta-Aramid multiturn ironer felt for applications at elevated temperatures.
THERMO 500 is a versatile Meta-Aramid multiturn ironer felt combining a limited padding build-up with high thermal resistance.
THERMO 500 – Versatile Meta-Aramid multiturn ironer felt for elevated operating temperatures.
THERMO 800 is a robust Meta-Aramid multiturn ironer felt for demanding ironers and higher operating temperatures.
Both the fibre layer and carrier fabric are made from Meta-Aramid, providing a durable construction for intensive use.
THERMO 800 – Robust Meta-Aramid multiturn ironer felt for intensive use and elevated temperatures.
THERMO HD 1100 is the heaviest Meta-Aramid multiturn ironer felt within the THERMO range and is designed for ironers requiring a robust and thicker padding construction.
Its heavy construction combines the thermal properties of Meta-Aramid with a high felt weight for intensively used industrial flatwork ironers.
THERMO HD 1100 – Heavy Meta-Aramid multiturn ironer felt for robust padding construction and intensive use.
When Conventional Felts Reach Their Limits
X-TREME 800 PTFE is a specialised multiturn ironer felt for the most demanding ironing applications.
The working side consists of a combination of Meta-Aramid and PTFE, while the spring side and carrier fabric are made from Meta-Aramid.
The PTFE-containing working surface promotes smoother operation and lower friction during the ironing process. Depending on machine settings and operating conditions, lower mechanical resistance can contribute to more efficient energy use.
The combination of Meta-Aramid and PTFE makes X-TREME 800 PTFE particularly suitable for high operating temperatures, intensive use and technically demanding ironing conditions.
X-TREME 800 PTFE – The premium solution for maximum performance with minimal friction.
Selecting the correct multiturn ironer felt depends on several factors:
Are you instead looking for a heavy ironer felt installed as one complete thick felt around the ironer roll? Then take a look at our MONO ironer felts.
Send us the details of your ironer and, if possible, information or photos of the existing felt padding. Contact us for advice on the right multiturn ironer felt, the appropriate quality, weight and version.